Questions & Answers for: tv stuck info channel

stuck on TV how do i turn it off You should have a button on your remote which says "display". Pushing that should toggle the ch number off. Hope this helps. You can also press "info", especially on A

...tv buttons. This was originally a return, and is stuck on channel 10, which works fine. When I go to "info" on the remote, is reads, "no program title, no program details, and also, "cc-off". Does ...

...TV is on DTV setting, to obtain freeview channels, the channel is stuck. Its on one channel, when first switched on pictures and sound work, will not move from this channel and can only get into ...

...stuck on ITV1 and no way of accessing channels setup on menu Thanks Vincent do a reset in the service menu the turn the tv off and press.. info>menu>mute>power on and go to the reset option. don't ...

...stuck on TV I cannot change channels or use any buttons on the remote control except menu. Within this area the channel function is not highlighted and plug and play is not accessible in the set up ...

...tv is stuck at one channel. Which controller board has to be replaced? The Key controller,LCD controller, or what? I got the same problem, TV stuck on one channel, what I did was, I remove the cable ...

...its channels, like if its in forward order, +Preset or +Channel knob would be stuck. If its changing in reverse order, check -Channel knob at front of tv. Hope this info would be helpful. Thank

...stuck there in the corner I had this problem with out Philips Universal Remote. I just pressed the INFO button and it went off. INFO must be equal to DISPLAY. Give that a try You may want to try ...

...It's just a matter of switching to 4 to make it work on your tv. More info on this here: ...

TV 27 model 27MDTR10S is stuck on channel 1. it will not change by the channel buttons or by the cable box. Rick, TV should be set on channel 3 or 4, when using a box. Unplug TV for 10 min.s to reset,