Question about PN42B450 Plasma TV
samsung 42 inch plasma on and off clicking problem wont turn on TV, turns on and off by itself, won't turn on with samsung remote control, or with direct tv remote, or by pressing on Power ...
shuts off. Which system board usually causes this problem the power supply board or the X & Y board and how do I test It ? Try changing the input device to something you are sure works. Switch off
picture shuts off on PN42C450 there are red dots and picture turns off frequently, is there any adjustments in the service menu to help prevent this Adjustments unlike to do anything but make matters ...
TV shuts off with volume control The TV turns on and looks for a channel then immediately shuts off. It was shutting off when using the volume control on the remote. Any ideas? Improper signal ...
Question about PN59D6500 3D Plasma TV
Samsung pn59d6500 plasma, the TV will come on and work fine for approx. 3 min. then shut off and come back on 15 seconds later and it repeats this continually. Check and replace damaged component/s at
Question about Pn60e550 60" 1080p Plasma Flat Screen Tv W
tv that shuts off by itself and turn back on when it wants too can this problem be fixed by me or would I have to take it in to a repair shop before you have it service make sure, if it is a smart tv,
Why doesn't it turn on? TV made sound like an arc took place & then shut off. Will not turn on. Measured input voltage on PS board and have 120V on output side of fuse. Is this board bad? Were do I ...
Usually answered in minutes!
53 Questions
48 Questions
42 Questions
33 Questions
32 Questions