...arm for the turntable will not go further right than the end of the part of the turntable where the record sits, so the arm cannot be rested on its stand. You are supposed to pull the arm right to ...
arm lifts, turntable moving Ok then just as the arm drops over the LP the whole movement stops, turnbale including. what have I done wrong. The belt is Ok. Is there some movement somewhere I can fix??
...Arm acting as arial I have a Numark TT1650 turntable. It's picking up radio signals and it has been suggested it could be the tone arm. Does anyone know of this problem. A metal tone arm has a ground ...
Question about PS-LX250H Turntable
...arm over? The turntable spins when the arm is close to resting, but when I move the arm over it stops. As soon as you move the arm to about half way through the rocord the table spins again. Also the ...
...arm of the turntable move it over to play just make noise I should not have to move the arm of the turntable over to play I should have to hit that bottom and arm should move by it self do I have to ...
Question about SL-BD22 Turntable
...turntable. How to find belt for arm? Does not move down. how to find belt for arm dose not move down i have aiwa LX20 turntable The tonearm belt is here AIWA turntable belt AIWA turntable belts AIWA ...
Question about SL-BD22 Turntable
...arm moves iacross JVC turntable AL-E300BK I have just got this out of storage (yes in my shed!) and I tested the turntable manually and it worked fine. Then I tested the push-button start/stop button ...
Question about SL-BD22 Turntable
...album it doesn't lift the arm and stop t Only thing I've tried is pressing and releasing the auto/manual switch on the turntable. Try cleaning the dried grease off the guide arm underside of the ...
Question about PX-E860 Turntable
...turntable needle arm My aiwalx 70 turntable is not working. I can power it up, and when i press the start/cut button the platform rotates, but the needle arm does not move to play the . Aiwa fusing ...
Question about PX-E860 Turntable
turntable arm will not lower - the guide just pushes it back to the off position The guide raises when we lift the arm to place it on the record, preventing the arm from lowering enough to touch the ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions