Questions & Answers for: turn sections wide screen monitor

...wide angle stopped all the way down. The issue with digicams is not that you have too little dof, but that it is a real pain in the a$$ to try and not have too much dof for portraits and such. I'm ...

...turn the power off and back on again the exact same thing happens. Help please!! Well my Acer AL1711 finally gave up in as much as the screen flashed briefly at switch-on then went blank, regardless ...

...turn it off and then back on, it illuminates for two seconds and goes dark. Check for bad capacitors in the power supply section, also check for shorted out transistors (4) C5706/5707 in the inverter ...

sections: "Focus adjustment" and "Focus drifts with warmup". The focus wire usually comes from the flyback or if the general area or from a terminal on a voltage multiplier module in some cases. It is

...turn on. It remains dark just see a quick flicker of light when I open the lid. One of two things are generally at fault. I am supposing that if you shine a flashlight at the screen you can see the ...

...wide inkjet for larger areas such as pictures and graphics. Each inkjet is made up of several lines or vents. Note, Black Fonts use only black ink, Black graphics use a conbination of magenta, blue, ...

...sections that look bulged at the top, or bulged/leaking at the bottom need to be replaced. If you repeatedly turn it off and on, eventually it'll probably stay on, but every time you turn it off, ...

...screen is cracked and because of that you see a wide white band in the center but it still works fine for this test. The original screen is white but my test screen works normal (except the crack of ...

...screen is cracked and because of that you see a wide white band in the center but it still works fine for this test. The original screen is white but my test screen works normal (except the crack of ...