Questions & Answers for: GMC Yukon XL when you turn the ignition key nothing happens

ignition, the key doesn't turn. 2002 GMC Yukon i had this problem with my 88'f350 dually. what happened to me was that the cylinder that holdes the tumblers had warn out and jammed one of the tumblers

Ad

ignition won't turn and I can't turn my car on Stupid question but have you parked with the steering turned hard on way Have you tried rocking the steering wheel left to right as you wiggle the key in

Ad

...turn the ignition key. try moving wheel side to side while trying to turn key, sometimes the wheel put preasure on lock and wont turn but if preasure is removed it turns, if that doesnt work try ...

Turn the ignition switch to the ON position (as far as you can go without starting the engine). 6. Turn the ignition switch to the OFF position. 7. Turn the ignition switch to the ON position. 8. Turn

...TURN THE IGNITION WITH KEY IN TO ON POSITION WITH ENGINE OFF FOR 10 MINUTES.WATCH THE PADLOCK.IF IT TURNS OFF.TURN OFF IGNITION SWITCH FOR 5 SECONDS.THEN TRY TO START ENGINE.IF ENGINE STARTED PROBLEM ...

Question about 2002 Yukon XL

1 Answer

...ignition switch at least twice for it to start You turn the key and nothing happens? The engine turns over normally but takes longer to start? The later is either a fuel pressure regulator or a bad ...

Question about 2002 Yukon XL

1 Answer

...key in the ignition, there begins a constant line of communication between your key's security chip or transponder, to the ignition's lock cylinder, and then to the car's TDM. These 3 ...

ignition switch (similar to a sliding electric switch, with the 4 positions, ACC, OFF, RUN, START), which was bolted on further down the steering column, underneath the plastic covering on the column.

ignition key, but nothing happening there isn't a problem of power... all the electrical is working. My wife describes it as all of a sudden, the key is just turning, but nothing seems to be "catching

Question about 2003 Yukon XL

1 Answer

my yukon 2003 has a passlock faillure turning the key to start but nothings happening That's not passlock. Unless you didn't state what is happening. Security will start the engine and shut in down in

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...