Questions & Answers for: Chevrolet Impala when you turn the ignition key nothing happens

Question about 2005 Impala

1 Answer

...TURN THE IGNITION AND NOTHING HAPPENS I TURN THE IGNITION AND PUT IT ON NUTRUL AND LET IT REST FOR ABOUT 20 TO 30 MINITUS AND THEN IT STARTS GOING AGAIN PLEASE HELP ME OUT I HAVE NO MONEY TO SPARE. ...

Ad

...turn key nothing happens. Then dash lights etc. come on & nothing happens. At later time vehicle starts. Changed relay switch months ago, but happened again today. Battery and cables appear good. ...

Ad

Question about 2002 Impala

2 Answers

ignition switch in my 2002 chevy impala and now it wont start.why? usually when u replace that you need to relearn the security system for it to start,,,,try to turn the key till the starter hits then

IGNITION SWITCH WILL CAUSE NO START PROBLEMS. try having some one turn the key while you tap the starter with a blunt object (hammer) if this works starter is bad. is the car in park try moving in and

...ignition and turn from off to on position several times (5 to 10 times quickly). Then remove your key and spray again and repeat key turning. Do this several times. I don`t recomend any spray that is ...

Question about 2004 Impala

1 Answer

...turn the key and it will start. The car has been taken in to a shop and had an anylsis ran on the engine. The mechanic could find nothing wrong with it. What could cause this problem? I had the same ...

Question about 2000 Impala

1 Answer

...key, the ignition/lock cylinder, or the TDM computer itself. (Theft Deterrent Module) All are expensive and pointless to fix. Your cheapest route is to bypass the whole system and never worry again. ...

Question about 2004 Impala

1 Answer

...Key turns OK, but won't start, won't crank. Wait 20-30 minutes, and car starts normally. There is usually a clue from the Battery and Security lights. The problem starting to happen once a ...

...ignition module, thats was ok for a day, then back to working bad, if i let the key snap back from start to on, the engine tries to start, then i just keep turning the key to start and on, real fast ...

...ignition switch going or gone bad. Ok, here's what you do, turn the key to the on position but DO NOT CRANK, let the key stay in this position until the security light stops flashing (takes 5 to 10 ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...