Questions & Answers for: turn dial broken washing machine

...dial so I don't know what programme I am selecting. Don't know if the problems are connected. Cheers unconnected faults. does water come out of drawer when filling? if so fault is a blockage in hose ...

...dial by removing it and get a pair of pliers and turn it to see if the machine will spin. If this is the case you will need a new knob for your dial. If it is not spinning then your belt is broken or ...

dial endlessly until we turn the machine off. We're going to call the company today and see what they can tell us but any suggestions would be appreciated :). sounds very much like the bearing

front loading washing machine why is there no response or readout at all on display? Assuming it's plugged it and you are turning the dials it is simply broken.

...turning and not clicking on the required setting Pull the dial off, there might be a couple screws behind it, tighten them and see if that helps.. also while the dial is off check for any broken ...

tub is not turning when machine is on spin The belt could be off or broken,check it out,or the dial couldbe no good,but if every other cycle works then it's probably not the dial.

...dial on/off dial just spins around, does not turn on machine if the teeth are damaged it will have to be replaced? check to see if the knob itself is damaged and then u have to only replace the ...

...Turn the dial to "seven-o-clock" (empty/pump out program) Release the "option down" button Turn of the machine This should reset the machine, and if everything is allright, it should work. If it does ...

dial will not turn, there should be one of two things wrong with it. 1) If your machine is over 10 years old, it is likely the timer/control is broken ( as in: worn out), and will need replacement. 2)

...turn dial to left/ counterclock wise the light to indicate what cycle is slected move to the the next cycle. Until it get to normal casual then the select light goes clock wise while i am turning the ...