Questions & Answers for: Xerox how to turn it on

...-Remove the Drum Cartridge -Next locate the black gear attached to the end of the Drum and turn it with your fingers. -Check to see if the gear is locked, or difficult to turn. The gear will ...

Docucolor 12 system fault turn off and turn on problem My docucolor is doing the same thing thats mentioned in the post. I turn it on, and it says system will be ready in 7 minutes, then, all of a ...

Workcentre M15i won't turn on after poss outlet short M15i was plugged in while in "on" position. It flipped breaker. Outlets working fine but cannot turn on machine. There is no "reset" button ...

Shuts down during warm up Problem: When I turn the machine on as it begins to warm up after about 10 seconds it shuts down and I get an L6 code. I Turn the machine off and wait 5 seconds, turn machine

Toner just replaced; asking to "reset" Broken Registration. Turn machine off. Hold * and 1 and 3 down at the same time while turning machine on. This should reset "Broken Registration". Turn machine ...

The print always prints one page when I turn it on The xerox phaser 6200 always prints one page when I turn on the power. Could you teach me how to turn off this function. You have to go into the menu

unable to use upper feeder on CopyCentre C20 Turn the machine off. Disconnect the white cable on the back of the machine. Turn the machine back on let it come to ready. Turn the machine back off, plug

-Xerox workcentre m20i. -Yesterday turned machine -Xerox workcentre m20i. -Yesterday turned machine "off". This morning tried turning machine "on"- does not turn on. -Checked power

turn off sound on the workcenter 7132 IHow do you turn off or turn down the sound of faxes coming in and going out? It is very loud! Try this link: ...

...Error User Corrective Action Error 01 Remove and re-install the black Toner Cartridge, then turn the printer off and on. Replace the black Toner Cartridge, then turn the printer off and on. ...