Questions & Answers for: the tub moves

Bosch Axxis WFL 2060 Front Load Washer--Tub won't move Loaded the front load washer pretty full and heard a scrubbing sound as the tub begain to turn during the wash cycle. After that, the tub stopped

...tub moves too easily in washing machine Kenmore ultra fabric care 2 washing machine was moved to put in a new floor. It shakes now in the spin cycle even with a very small load. We used a level to ...

on spin cycle tub not moving--the belt is on the tub but the tub does not move. started to spoke sounds as if you overfilled your washer, try putting less clothes into the tub .

...tub moves it's not sliding on this snubber but grinding into the base and rocking the entire machine around,vibrating and walking all oveer the place(hehe..i seen one washer that had that snubber ...

...be taken apart to be moved? go get two furniture carts put one under each end(after emptying the tub) you cn raise the tub with blocks and a 5 foot long 2x6..raise the tub until the cart fits

Maytag washer tub will not spin. I have a maytag mav3855aww washing machine. Last night the washer made a clunking noise and smelled of smoke. I noticed that the agitator was not moving at all. I ...

how do I repair my whirlpool washer the tub does not move WHEN YOU TURN ON MACHINE IT WILL FILL UP WITH WATER BUT IT WILL NOT WASH THE TUB WILL NOT MOVE YOU CAN HEAR THE MOTOR RUN BUT THE TUB DOES NOT

...tub always moves with each "wiggle" of the inner tub. If it moves but doesn't move the outer tub, then you have a broken 'spyder' which is the triangle piece that holds the inner tub/drum to the hub ...

...tub and nothing else moves it appears to be off track any ideas? My LG washers tub became loose and when I took it apart the spider arm on the tub was corroded and broken this holds the tub straight ...

...tub to the motor hub. Try wiggling the inner tub up and down/back and forth and see if outer tub moves in tandem. If inner tub moves without simultaneously moving outer tub, broken spyder is