...trunk release button will now work without the key for a several minutes. Unfortunetly no. The design is like that so if you leave your top down no one can get into the trunk. You'll have to call a ...
release the top handles to free the top. Hit the button enough to raise the top slightly and put the handles back in the closed position. Then you can put the top all the way down. There is a built in
...trunk release button on the inside does not work. Does the back seat fold down? If so you may be able to get into the trunk from the back seat. Check to see if a fuse is blown for the remote trunk ...
holding trunk release button re-insert fuse and trunk release should work Is there a trunk release in the glove box, or elsewhere inside? Or is that all locked up too? You may have to call a locksmith
...trunk release button on the dash and on the remote does not work. the lights flash when you use remote but trunk does not open. the key works Check the fuses under the dash for it. Also check for ...
...trunk release motor works, i would start there. another way would be to go to the dealer and give them the vin # and they will cut you a key. the last thing to do if all fails is to have a lock smith ...
...release the pressure and get the top outstretched and the trunk shut. however, now the top button will lower all windows and do nothing else. also the trunk button on my keys is registering but the ...
Question about 2008 Sebring Convertible
...release solenoid of your trunk/decklid on your car. That button should be either in the glove box or on the shift console. It does have a 10 amp fuse somewhere in the fuse box. Good luck and keep me ...
button, windows come down,top releases, trunk opens, top gets halfway back then stops and is stuck. Closes fine just won't open all the way? There could be Low hydraulic fluid level in pump reservoir.
Usually answered in minutes!
1,173 Questions
965 Questions
801 Questions
581 Questions
462 Questions
