...slipping will not happen that is to tighten up your input and output shaft nuts on trans the torque should be 110 ft lbs. if the fluid has a burnt smell to it then the trans needs to be torn apart to ...
...CL2 having shifting problems This 1997 Saturn CL2 is not shifting correctly. I had just put a used transmission from a SL2 also a 1997. Installation went fine. All wires are connected. Is this units ...
...trans starting to shift weird and maybe slip...not sure if its actually slipping but when im accelerating its not smooth at all, the rpms go up as normal then all of a sudden drop then come back up, ...
slipping trans leaking fluid slams into reverse shifting is hesitant then car jumps into gears on highway. automatic transmission 1998sw1 Your tranny is shot. I had the same problem with a customers ...
trans slips replaced still slips have a 2001 sc2 1.9 auto trans slipped changed filter shifted hard replaced trans still has same problem idle is irratic 850 is lowest up to 3000 junkyard trans still ...
slipping and harsh shifts. Shift solenoid 2 is used to apply or release second gear clutch. The PCM controls 2nd gear by controlling the ground for shift solenoid 2. The PCM will turn the solenoid Off
Usually answered in minutes!
1,310 Questions
953 Questions
1,183 Questions
963 Questions
862 Questions