Questions & Answers for: Chevrolet TrailBlazer trans slipping

...trans slipping when reaccelerate when driving and if i reduce the speed and then reaccelerate the transmission slip. i want to know if this could be resolve by replacing the shift selonoid. Thank you ...

slipping between 1st and 2nd Trans. are interesting creatures the trans you have is all electronic. But if you are only experiencing slipping between 1&2 you are probably looking at a rebuild. I would

...slipping, Any help Find a quiet empty stretch of road. Go 50 mph, put the trans in NEUTRAL and shut the engine. If noise is still there, swing car left and right to detect noise differences. Could be ...

...away you can do serious damage to the trans. (almost 30 years rebuilding trans and 4 of them directly for GM. I know the 4l60e extremely well) Do not drive this if it is slipping. Hope this

...slipping somewhat but turn off car crank back up and it works again for awile 128000 miles never changed fluid or filter change trans filter and fluid recommend flushing cooler but filter is probably ...

...slipping just started I don't think all the assorted noises was the trans It has been my exprience that you can buy a rebuild kit for any vehicle ,but I would try changing transmission fliuld and ...

slipping). They seemed to be only when the truck was "cold", and happened only when first starting out. The shift solenoids are located inside the transmission.The average person and alot of

...slipping I DON'T ALWAYS HAVE 1ST GEAR & won't go into 4th gear all the time. Does one solenoid shift 1st & 4th & the other one does 2nd & 3rd? Or is it 1st & 2nd & the other 3rd & 4th? couple of ...

...trans fluid to full when running and in park..don't over fill...let it sit and run for around 15 mins on a dry concrete surface and check for any leaks..I've just ran into a transmission that someone ...

I have a 2003 trailblazer and trans shifts fine from 1 to 2 but when it try’s for 3 all it does is slip then shifts back to 2!! Any ideas for fixes or what could be wrong? Try an oil and filter change