...the trans(hair dryer needed to heat the "goo"-sealer on the harness plug) the trans' is in "limp(default)mode,just to keep you moving!! driving it this way for a month WILL destroy the
...limp in mode? only getting 1 and 3rd? have you checked the imput to computer from the coil pack? if it does not recieve signal it won't shift. Seems as if you have Covered all PRELIMINARY Bases, So ...
...limp mode and throwing just about every code imaginable!!! have noticed there is a dead 12g wire that goes into the computer that has no power going thru it.....any suggestions? 2-3 shift solenoids ...
...trans will generate more heat than normal while operating in limp-home mode due to increased torque converter slippage during 2nd gear starts and no lockup in 3rd gear. Thank you for using fixya and ...
...trans will go into limp-home mode. Be sure the trans has power and the fuse is not blown before doing anything else. What is "limp-home mode" ? This is a fault mode in which the transmission either ...
Usually answered in minutes!
2,307 Questions
1,793 Questions
1,647 Questions
1,619 Questions
1,503 Questions