Questions & Answers for: torque values

...torque values for a particular item, I may can provide that but I cannot provide ALL the torque values for the engine as there are quite a lot of them. If you need that level of information, I'd ...

head bolt torque 1979 harley xls Hi Anonymous, in a criss cross pattern start with a torque value of 20 ft lbs. then repeat sequence with a torque value of 40 ft lbs. then 60 ft lbs. and ending up ...

...1/4" fasteners 10 ft lbs. 5/16" fasteners 20 ft lbs. use a criss cross pattern and split torque values in half for the first go round then full torque values on the second go round. Good ...

torque value. Commonly, Head bolts are tightened and then removed in sequence as you step threw 3 values: 23/33/45 ft lbs then the final value is achieved by rotating the bolts 90 degrees so the final

...are strange to me. I would never do major engine work without first buying a shop manual, as I find so many helpful tips and tricks plus all the needed specifications and torque values. Just

I need torque sequence for rod bearing caps found the sequence for the main bearings but not for the connecting rod bearings There is no sequence for the rod caps Since there are only 2 bolts per cap ...

...it is not just the torque value, but sequence that is important. Further, many newer engines use head bolts that must be replaced, and torque values now may include degree angles for final

...torque values to use. Here are some general torque values for common components on the Toyota Corolla VVTi 1.3 engine: Cylinder head bolts: 55 Nm (41 ft-lbs) Connecting rod nuts: 40 Nm (29 ft-lbs) ...

Mio Soul i 125 rear axle nut tightening torque value Hi May I know the tightening torque value for the rear wheel nut of Mio soul i 125. There is no info for that in the motorcycle's manual Thanks in ...

I would like to know the tightening torque of head bolts of Loncin engine 350cc ,used in voge motocycles ,sr4rmax, after the completion of 1000km.( running -in period).Thanks,Dimitris I'm trying to ...