Questions & Answers for: torque specs radiator

torque specs for the bolts. Also should a put Permatex on the gasket? 30ft/pounds old style gaskets yes,the newer ones you shouldn't have to,but check with the gasket and radiator supplier as they may

why do i have oil in my radiator Sounds like your head gasket is leaking. If the head is not warped, replace head gasket and torque to manu. specs.

Where is the thermostat located on a 2004 Dodge Ram 150 6 cylinder. Follow the hose from the bottom of the radiator. this is the housing and has to bolts. Torque spec I believe is 10 ft-lbs.

...specs (torque) (pound per sqr inch). replace coolant and make sure the mixture is at manufactures specs for your weather. 5 Run engine for ten minutes and make sure their are no leaks. the thermostat ...

...torque specs for the intake manifold of a 92 buick century 3.3l V6??? I blew a radiator hose and over heated the engine in my 92 buick 3.3l V6 causing the intake gaskets to fry and shrink. I pulled ...

...torque specs, eng ine info, switches functioning, assemble, disassembly, complete refurbish, repair, installation every single thing is covered within seconds u can get the access and it's totally ...

...making sure to orient the thermostat the same way as the original. install gasket using water rated gasket seal and torque the bolts to specs. let set for several hours, refill radiator, and ...

torque specs for the intake and exhaust manifold bolts 3020 gas Don't worry I'm sure you will get the solution of your problem, just check the link I attach. 1964 john deere 3020 WORKSHOP SERVICE ...

...torque specs There are not really a lot of spec's for water pumps they have what is called a weep hole on the under side of them .If coolant is dripping from that hole its toast won't fail tomorrow ...

Torque specs for 2 radiator cover bolts tighten down then half turn don't do it to tight as can strip the threads.