...top padded oiling tray to fall down into the machine, causing it to "lock up" for the operator. I needed to totally re-adjust the stitch length regulator. Thats good, but now the machine "jumps" ...
top thread and the bobbin thread are loose. the stitches look like_____ _ _ _ _ _______ _ _ _, it's pretty much a long stitch then it goes regular then it gets longer and then it goes back to regular,
...loose and i can see the loops coming out. i threaded the machine correctly. its hard to find the problem. could you please let me know . thank you so much oshi Make sure that the needle is inserted ...
Question about DDL-8700
...top stitch is fine. Help Please t try changing the needlerethread the machine use every thread guidecheck to see if the thread has come off the thread take up leverclean under the needle plate & ...
how do i know what thread tensions to use? sew with scrap and look at bottom stitch. if loose tighten tension on top. adjust until stitch is balanced. u may have to loosen bobbin tension too!!
Question about DDL-8700
...top stitch and the bobbin stitch and it did not make any difference at all. try loosening tension on bobbin thread with very small screw driver.Also your upper thread tension disks may be dirty and ...
Question about DDL-8700 Industrial Straight Stitch Sewing Machine, Servo Motor
...top tension. If you have a spare piece you may want to run some of the plastic through the machine until you get the tension correct. If the top tension is too loose, the stitching will just pull
Question about DDL-8700 Industrial Straight Stitch Sewing Machine, Servo Motor
...top stitch and can't seem to get it right. Please help!! you need to tighten the tension control knob You need to check and see if you have lint between your needle thread tension discs. this will ...
Question about DDL-8700 Industrial Straight Stitch Sewing Machine, Servo Motor
...top stitching is perfect but the stitching from the bobbin is loose. how to fix, I did try sighing the screw on the bobbing , did not work please help!!!!!!! When the bobbin stitching is off the ...
Question about DDL-8700 Industrial Straight Stitch Sewing Machine, Servo Motor
...top tension to four. Now, if the bottom seems too loose go ahead and loosen the bobbin tension a little at a time. If your upper tension isn't real true at four you may have to slightly raise the ...
Usually answered in minutes!
204 Questions
118 Questions
101 Questions
98 Questions
27 Questions