...top and bottom tensions. Ensure that all is clean and free of lint and jams, this is the most likely cause....now for tension troubleshooting ....... This solution is for tension problems...if you ...
...top and loose stitches underneath from the bobbin. change needle change your stitch length dial to a number higher like if it on 3 change it to 4 or 5 change the tension to 3 or 4 clean under the ...
...loose and sewing right. I have tried tightening the tension on the bobbin. It was sewing ok and now its not. I have changed the needle, rethreaded the top thread and still having problems. What can I ...
Question about Ellure
...stitch length as well as messing the underside of the garment .Under threads are all looped. What is wrong ? have you tried changing the needle?clean under the needle plate & in the bobbin area ...
...top tension. Do a test seam to see if that helps. If it does, loosen some more until you have a balanced stitch. Finally... if neither of those really help. Look on the bobbin case for the tension ...
Question about Esante
top tension to loose or too tight YOur top thread is looping, right? Re-thread your top thread, making sure you floss it into the tension system. When you drop the pressed foot it should offer tension
...is snagging the top thread like thread trapped inside the hook system or a little burr on the stitch plate. Moving faster means the fabric tractors harder, so any burrs will be mre
...bottom stitch is loose and messy. try adjusting the top thread tension also try changing the needle-one that is for the fabric and thread if that doesn't help, then a repair shop would be a good ...
...top can be loosened. If this causes your stitch to be too loose then tighten your bobbin tension. Just think of the top and bottom tensions as a tug of war. They must be even to get the stitch in the ...
Usually answered in minutes!
212 Questions
195 Questions
142 Questions
117 Questions
66 Questions
