...top loading washer. It will wash and once it gets to have to rinse and spin it doesn't go it dead at that point. What could be the problem/ Check each temperature during initial wash fill. Set to hot ...
...rinse angent and my top rack of dishes like glasses is not coming clean. It appears that whatever gets washed off the dishes just sprays and dries on the glasses. Like there is no water being sprayed ...
...top load machine works fine, goes thru the cycle. The clothes are still soapy at the end of the rinse cycle.I am not using to much detergent. The thing I don't hear is the spray of water during the ...
Question about 24 in. IDW602 Built-in Dishwasher
...top spray arm and check and clean all the holes as this is where the water sprays out from to clean the dishes and glasses. When they are blocked you get poor wash results. Might also be worth ...
Question about 24 in. KUDS25SH Built-in Dishwasher
top spray arm? yes, the spray arm can be removed and cleaned out. Also, clean the 3rd (very top spray area) located attached to the top of the dishwasher. You want to make sure this small (1 inch size
Question about 24 in. FDB1050RE Built-in Dishwasher
...top spray arm is not turning to rinse...what is problem Hi, Often they will not spin because there is stuff inside that plug the holes... Here is a tip that I wrote about your problem... ...
Question about TAWX700JQ Top Load Washer
is the volume of water if on extra heavy load does this machine hold?? thanks On the highest water level 20-22 gals. per fill, wash, rinse, spray rinses, equal about 44 gals without a 2nd rinse option
Question about Dependable Care LAT9206
...top. I have tried replacing the timer unit that the knob hooks to, did not change anything. any help would be greatly appreciated. Thank You, Steven Hill I would look at lid switch on this model and ...
Question about Dependable Care LAT9206
...top and bottom spray arms. Check the slots/holes for obstruction, and run water through them under a tap, outside to inside (the opposite to how it is in the machine) rocking the arms up and down to ...
Question about Dependable Care LAT9206
...top spray arm is turning! check for blockage in the jets at the very end of the spray arm, or that the spray arm has not split. Put the arm in a known position, and check it has moved after a few ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions