Question about 2263 Mechanical Sewing Machine
...top loading bobbinif it's a side or front loading bobbin make sure the bobbin case isinserted correctlyif the bobbin and bobbin case are inserted correctly thenit sounds like the sewing machine ...
Question about 2263 Mechanical Sewing Machine
...top loading bobbin make sure the bobbin is turned the rightwayif it's a front or side loading bobbin make sure the bobbin is insertedcorrectly into the bobbin case and that the bobbin case is ...
Question about XR-65t Mechanical Sewing Machine
...top loading bobbin if the machine has a side or front loading bobbin also make sure the bobbin case is inserted correctly into the machine. and also make sure the top thread has not come off the ...
Question about XR-65t Mechanical Sewing Machine
...correctly if it's a top loading bobbin if it's a side or front loading bobbin make sure the bobbin case is inserted correctly it also could be a timing problem that a repair shop would have to
...top of the bobbin to make a loop, it passes just underneath the top of the bobbin, therby looping around the bobbin. The bobbin is loaded according to the manual, and the top thread is threaded ...
Question about XR-65t Mechanical Sewing Machine
...top loading bobbin, and the plastic bobbin "tray" is rotating, then it may not have been nested in properly, before replacing the plate, or may be "jagged" somewhere... If there is a burr on the ...
Question about 915
...top loading bobbin you may need to have the bobbin case checked to see if it's damaged or see if the hook and hook race has a problem 8. Make sure the top thread tension is on the correct setting for ...
...top loading bobbin you may need to have the bobbin case checked to see if it's damaged or see if the hook and hook race has a problem 8. Make sure the top thread tension is on the correct setting for ...
...bobbin case. Set the top tension to the midway point. Test your machine and tweak the tension until both threads meet in the middle of the fabric. FWIW, thread problems appearing under the fabric are ...
...top thread test. When loading the bobbing, as you draw the thread into the notch with left hand, and prevent the bobbing from moving with right hand, you should feel the thread slip into place behind ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions