Questions & Answers for: Konica Minolta toner light

toner rotation problem hi, when powered on, the error light starts blinking slowly. Status monitor says to install cartridge with x color, x being any of the colored ones (usually a different toner ...

...toner light, inserted new cartridge , change toner light is not on, copier does not make copies, changed toner 3 more times , still no copies. Any thoughts or help would be appreciated. Thanks take ...

...toner light stays on Konica 7022 copier, put new toner bottle in, copier prints 1 copy, then says add toner. Help! Remove the toner bottle carefully, pwr off and unplug the machine , then plug it in ...

...toner and blue light continues to flash The machine is indicating that toner is empty and flashing light means you have to replace it with the new one.Buy a new toner for your copier and install ...

...light is off, but all four toner lights are slowly blinking together. According to the manual this means that the toner is near empty. However, I have replaced three of the four toner cartridges and ...

toner inside that clear plastic window which stops the light from making it through the window and the machine will tell you the waste toner is full. Just dumping the container out will not clear that

...toner now have erro light on black and red toners nd QQue won't take print command I also did the Microsoft 'FIX IT' which found no problems still magicolor will not print or accept commands in que I ...

...toner light after adding toner I assume you mean light as in light copies of the original Turn off the machine. take out the toner bottle with it out (BE CARE HOLE MAY BE ON THE BOTTOM) turn on the ...

...light does not come on. Last toner indicated replace toner. So changed with a brand new toner. First it printed 20 pages. Then stopped. now the display does not have any letters. It has many short ...

light copy result Take out the toner cartridge and tap it on it's end to dislodge any packed up toner first. If this doesn't work and a new toner cartridge has no effect, then the high voltage applied