Questions & Answers for: HP LaserJet toner life

...shelf life. Toner maybe expired or already have a moisture. Cleaning blade maybe stick on the drum after long storage. If cleaning doesn't improve prints. You will be needing new toner

Ad

Question about LaserJet 2100 Printer

1 Answer

...toner and it has more than 35% life left in it, it is supposely still under warranty (HP Toner Cartridge has what is called Limited Life Time warranty, whatever it means nowaday). Well here is where ...

Ad

Question about LaserJet 4600dn Color Printer

1 Answer

...what the coverage was. calibration does use ink, but should not be that much. If you are using non-HP toner, this may be why you don't full life out of them. Try HP toners and see if problem

Question about LaserJet 8000dn Printer

1 Answer

...black of toner then its the charge corona or if it is only just partly with streeks and spots then its the drum. Tip---- always check to see if the drum has done life in the counters. good ...

Question about LaserJet 3030 All-In-One Printer

2 Answers

...toner unite ,it has some of components which has life period and expiry date after damage.Such as opc drum which maintain your print quality another toner supply mg roller which work toner supply and ...

...color pages. When you print color you are engaging all four toner cartridges and are producing waste toner from all of them. This shortens the drums life, and waste toner capacity, to 5,000

Question about LaserJet 1100 Printer

1 Answer

life of a cartridge in an opened package is approximately 6 months. Then follow below steps: 1.Open the printer door and remove the print cartridge from the printer. 2.Gently shake the print cartridge

Question about LaserJet 2840 Printer

2 Answers

life of a print cartridge depends on the amount of toner that print jobs require. When printing text at 5% coverage, black print cartridges last an average of 5,000 pages and cyan, magenta, and yellow

Question about Color LaserJet 2600n Printer

1 Answer

...life cycle is based on prints made which when youve em[pied the toner once has been completed- re using these parts by just putting toner back in will greatly increase the failure rate, and with V ...

Question about LaserJet 2840 All-In-One Printer

1 Answer

...run a toner unit beyond its working life preset- parts have worn developer has worn down drum surface will be scarred drum blade will be blunt-etc etc etc..... replace with NEW and have 100% life ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...