Questions & Answers for: VitrA toilet seal

toilet why will it not stop running the flapper is not closing all the way in the tank. if, when the handle is at rest, the flapper chain is too taut, the flapper is not closing all the way. so loosen

...toilet will not seal at the base...no matter what kind of wax ring or how many we use, as many as 3 at a time. Nothing works!!!!! Did you change the height of the flooring? If you changed the height ...

...that the leakage is being caused by a worn-out flapper or seal (the part the flapper seats on). You can buy after-market kits that have replacement parts. What is the make and model of your

...seal was put on wrong. If the toilet rocks it will ruin the seal. once the wax is squeezed it can't be moved. Sometimes the wrong thickness of wax was chosen. If a new floor was put down the flange ...

How do i adjust pop up plug to keep water in the sink? When push down the plug, it does not make a seal Most of them have a thin O-ring around the outer edge. If that's gone you may have to get a set ...

...toilet back is removed does the seal need to be replaced? Yes the rubber gasket between the bowl and the tank should be replaced, because it takes the imprint of the flush valve and ther's no way to ...

water leak onto floor at bottom centre at base not wet at topor down sides call a good plumber the wax seal has failed

...I find a gasket (seal) for the connection of Vitra 6853-1 toilet tank to bowl? Manufactured around 2003 - 2005 any home depot or lowes should have one that will work for you. take the old one with ...