Questions & Answers for: Mansfield Plumbing Products toilet seal

after toilet completes flushing within 10 minutes it will get a 1-2 second flush and continues cycle repeatedly and then stops for days resuming normal operation the flapper isn't sealing right

...toilet is turning on and off periodically. I replaced the flush value seal (red rubber ring), but it continues to leak. Is there a trick when replacing the seal? Top and bottom seals: It is best to ...

toilet is cracked and leaking how do I change the ring? The tank will unbolt and can be removed to replace this seal. Better yet for about $130 you can have a 1.6 LF new in box and start saving water.

...Removing this will cause the toilet to not operate properly. If the hole is not sealed properly seal with a good grade silicone sealer. Make sure surface is dry before applying. Hope this

Toilet flush valve is hard to flush....too much suction. Sometimes takes two hands to push the handle. Hi, you need new Mansfield 210/211 flush valves. They can be found on amazon.. here: Amazon com ...

the orange seal which prevents water from leaving the tank need replacing frequently. Is this customary for these seals to wear out so quickly? I'm replacing the seal about every 3 months. make sure u

...toilet. Look under tank to see if water from seal or just loose bolts. If you have to replace those innards of tank. Home Depot/Lowes will give step by step instuctions. Take it to them and then will ...

...toilet was hard to flush, so I replaced the orange gasket. I coated it with automotive grease. Now it runs almost continuosly and sometimes makes a loud vibrating noise. Looking at the old orange ...