Questions & Answers for: timing points

what does set point time and set point temperature mean on 7 day programming, why do you do set two seperate times for one day as illustrated in the manual? I want my heat each day to come on at 5:00 ...

Im stuck on timeshift On timeshift for the xbox 360 im stuck and wondered if you knew any cheats to help me Cheers go to www.cheatplanet.com Play as Dr. Aiden KroneEnter the options menu, select ...

...opened then get a timing light and rotate the points base plate as needed to reset the timing. There should be timing marks on the flywheel that line up with a stationary mark on the engine

...timing light. In general, set the points gap at .012 to .015 and you should be about right. The gap is set with the arm riding on the high point of the magneto center lobe. Please take a moment and ...

...points. Set gap to .015" Rotate engine 180 degrees and repeat. Reinstall spark plugs. Hook up timing light to left hand spark plug (cylinder #1) Start bike and hold throttle about 2500 RPMs. Shift ...

...Now use a timing light to set the timing. Set the timing at idle by rotating the points base plate left or right as needed. Rev the engine to see the timing marks advance due to the spark

...degrees dwell,but setting the point gap at 18 thousands of an inch work well,then adjust the timing. dwell changes timing but timing does not change dwell,so adjust the points first then set the ...

...point gap and the timing is off, you need to replace the points. There should be some timing marks somewhere on the flywheel/engine case. If you need more help,, just reply to this post. Good

...points should break contact just as the 20- degree timing mark aligns with the flywheel timing mark. Final timing is corrected by properly shifting the breaker point box on its mounting and using ...

what are the points for on Fixya site What are points on Fixya? Each question or problem posted on Fixya earns the person who provides a solution from 1 to 3 points. Based on the time in which a ...