...timing marks on the crank pulley - they are a series of indentations on the crank pulley and you will see the pointer on the crank pulley cover. The largest indentation on the pulley is TDC (Top Dead ...
...timing marks and the belt goes on with the marks on the points.cam pulley has a stamped mark up with line marks that go evenly one on each side has to be even with top of the head.crank pulley the ...
...timing marks for a 2002 honda civic 1.7 litre engine There are 4 marks on the crank pulley. When standing on the driver side of the car looking down on the pulley, the mark farthest to the right is ...
...timing belt off without marking the pulleys, and looking in the manual can i just line of the marks on the pulley with the marks on the block? and by doing this will it put the no 1 cyl on top dead ...
...timing range marks on the front cover and found the mechanical timing to be off one tooth I had to take the front of the engine apart again and use the crankshaft pulley and front cover assembly as a ...
Question about 1995 ST 1100 Pan European (cbs-abs met TCS)
...timing marks in the honda manual didn't work. I need the timing marks for a 1995 honda ST1100 Yes, the Honda manual is incorrect. Set the crank pulley at T1 with both camshaft pulley marks lining up. ...
timing marks on the 1.7 ltr. sohc on my 2004 honda civic ex, has timing belt there is a timing mark on the timing cover that lines up with the mark on the crank pulley (i believe the mark is above the
...timing belt marks, then install the balancer belt drive sprocket on the crankshaft.Align the front balancer pulley; the face of the front timing balancer pulley has a mark, which must be aligned with ...
Question about 1998 CR-V
What's the name of the belt that goes on the pulley on a Honda 98 crv serpentine or timing belt you didn't mention which pulley
Question about 2005 CRV 2.2
...pulley on my 2002 honda crv lx and don't know what belt I need to use help me please. Question edited for clarity. Question moved to Honda CRV. The whole idea of using a Bypass Pulley is that it ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions