...Tilt the drum back and support it while placing the front panel back onto it's hooks. With the front panel on (don't screw it on yet), rotate the drum by hand to make sure the seal is not kinked and ...
...tilt forward. At this point you will be able to completely remove the cabinet. Once you have cabinet removed just set it aside. Now, just lay the washer on it's back. At this point you will see the ...
Question about Elite 45986 Front Load Washer
Tilt machine backwards to unscrew 3 screws below the front panel, the kick panel. Slide the panel downwards & out. Put your hand up towards the lock portion (inside the machine that is), you will feel
...tilt forward. At this point you will be able to completely remove the cabinet. Once you have cabinet removed just set it aside. Now, just lay the washer on it's back. At this point you will see the ...
Question about 4.5 cu. ft. Oasis Canyon Top Load Washer
...Slide your screwdriver underneath the metal cabinet clips. Wiggle the screwdriver back and forth to gently pry the cabinet clips free. #6 Disconnect the group of colored wires that plug into the top ...
...tilt the top of the cabinet toward you by pulling the cabinet away from the base. This releases the front and back slots of the cabinet from the tabs in the front and back of the base. Using the side ...
Usually answered in minutes!
1,329 Questions
1,410 Questions
750 Questions
524 Questions
182 Questions