Questions & Answers for: tighten valve cover gasket bolts

...valve cover area , with like 4 screws holding it down , allen headed screws i think , you will find your wires and plugs under that cover . actually you will find 2 coils with 2 10mm bolts on each ...

Ad

Question about 2002 Spectra

2 Answers

...2002 kia spectra? The exhaust manifold is right there as soon as you open hood , first disconnect neg batt cab, then jack up car remove bolts that hold pipe to manifold together , unplug any o2 that ...

Ad

...Valve cover bolts on Kia Sportage 95 i am replacing the Valve cover gasket on a 1995 kia sportage and i need the torque spects for the bolts.thanks Mike The gasket has metal torque limiters.use your ...

...valve facing upward. Install a new thermostat gasket. Fig. Use a new gasket (A) when installing the thermostat (B)-2.0L engine shown Install the water inlet fitting and tighten to 14-19 ft. lbs. ...

Question about 2002 Spectra

1 Answer

...tighten the valve cover bolts? thanks -Alex The spec for the valve cover fasteners is 10 nm (about 7.2 ft/lbs) and the sequence of tightening is diagonally from inside to outside. Joe please rate my ...

valve cover torque specs for 2002 Kia Spectra 1.8 DOHC Bought valve cover gasket online from a Kia OEM discount place and requested torque specs. None provided, of course. The torque  specs for a

...valve cover and top of head from all debris and remove all old gasket material. Tighten back down in sequence and do not over tighten. these small bolts can be overtightened easily so go in sequence ...

does a 2002 kia spectra have an egr valve Yes it does... I checked RockAuto... They only carry the GASKET 2002 KIA SPECTRA 1 8L L4 EGR Gasket RockAuto

...valve cover gasket. Gasket is leaking. It ranges between 50 and 100 lbs. depending on the material, engine model, and bolt placement point. Use the manufacturer's manual to check for the exact torque ...

valve cover bolt torque specs please? Please help Question edited for clarity. Question moved to Model Category. https://www.kia-forums.com/threads/torque-pattern-for-valve-cover.108178/ This show Kia

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...