Questions & Answers for: Jeep tighten chain 250 kymco

Question about 2001 Grand Cherokee

1 Answer

...down) into recessed machined groove on timing chain cover. Position thermostat housing on timing chain cover. Install two housing-to-timing chain cover bolts. Tighten bolts to 115 inch lbs. (13

Ad

Question about 2001 Grand Cherokee

1 Answer

Tighten the preload bolt to 108 N.m (80 ft. lbs.) torque. View Full Image To verify correct installation of the timing chain, turn the crankshaft to position the camshaft sprocket timing mark as shown

Ad

chain and sprockets with the timing marks aligned. Tighten the camshaft sprocket bolt to 80 ft. lbs. (108 Nm) for 2.5L engines or to 50 ft. lbs. (68 Nm) for 4.0L engines. For 2.5L engines, release the

Question about 2001 Grand Cherokee

1 Answer

chain cover bolts. Tighten bolts to 105 inch lbs. (12 Nm) torque. Install lower radiator hose on thermostat housing. Install splash shield. Lower vehicle. Fill cooling system. Connect negative battery

Question about 2001 Grand Cherokee

1 Answer

chain cover bolts. Tighten bolts to 105 inch lbs. (12 Nm) torque. Install lower radiator hose on thermostat housing. Install splash shield. Lower vehicle. Fill cooling system. Connect negative battery

chain cover bolts. Tighten bolts to 115 inch lbs. (13 Nm). CAUTION Housing must be tightened evenly and thermostat must be centered into recessed groove in timing chain cover. If not, it may result in

Question about 1996 Grand Cherokee

1 Answer

...at around 225 thousand miles. Chain and gears are not super expensive and if you buy the best ones you can find, if you replace yours at 225-250 thousand miles the new one should outlast the

Question about 2000 Grand Cherokee

1 Answer

chain cover bolts. Tighten bolts to 115 inch lbs. (13 Nm). CAUTION Housing must be tightened evenly and thermostat must be centered into recessed groove in timing chain cover. If not, it may result in

...tighten idler sprocket assembly retaining bolt to 25 ft. lbs. (34 Nm). step 13: Align left camshaft sprocket "L" dot to plated link on chain. Align right camshaft sprocket "R" dot to plated link on ...

Question about 2000 Grand Cherokee

1 Answer

...chain guide. Tighten the bolts to 250 inch lbs. (28 Nm). Install left side chain tensioner arm, and Torx®bolt. Tighten Torx®bolt to 250 inch lbs. (28 Nm). Install the right side chain guide. Tighten ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...