timing chain when i spin the motor the timing chain gets loose thenn tightens back up Do you have new chain and gears installed and what symptoms do you have.Are you changing the timing components for
...chain guide and tensioner arm. Tighten attaching bolts to 28 Nm (250 in. lbs.). NOTE: Inspect oil ring on chain guide access plug before installing. Replace O-ring as necessary. 10. Install chain ...
chain case cover. Tighten screws to 12 Nm (105 inch lbs.) . Rotate pump by hand to check for freedom of movement. Position pulley on pump. Install screws and tighten to 30 Nm (250 inch lbs.) . Install
...chain guide. Tighten the bolts to 28 N·m (250 in. lbs.). CAUTION: Overtightening the tensioner arm torx® bolt can cause severe damage to the cylinder head. Tighten torx® bolt to ...
...chain case cover. Tighten screws to 12 N·m (105 in. lbs.) Rotate pump by hand to check for freedom of movement. Position pulley on pump. Install screws and tighten to 30 N·m (250 in. lbs.) ...
chain it dont tighten up when i put it on if this has a chain then you have forgotten about the chain tensioner and chain slippers,which is what keeps tension on the chain.if you mean timing belt then
Question about 1997 Caravan
tighten the bolts, in sequence, as follows: Step 1: Bolts 1-8 to 20 ft. lbs. (27 Nm) Step 2: Bolts 1-10 verify torque without loosening Step 3: Bolts 9-12 to 10 ft. lbs. (14 Nm) Step 4: Bolts 1-8 plus
...6 Lefthand cam phaser alignmentFig. 7 Timing chain alignment marksFig. 8 Upper intake manifold tightening sequenceFig. 9 Valve cover tightening sequence. LefthandFig. 10 Valve cover tightening ...
Question about 1985 Ram 3500
tighten the tensioner. I tightened the tensioner but now it won't start. What do I do to fix? Personally i would recheck cam timing. You probably moved cam in relation to crankshaft when you tightened
Question about 1985 Ram 3500
...chain on sprocket. Pivot BSM assembly upwards and position on ladder frame. Start BSM mounting bolts by hand. Use a three step procedure when tightening BSM mounting bolts. Tighten new 180 mm BSM ...
Usually answered in minutes!
2,271 Questions
2,049 Questions
1,788 Questions
1,616 Questions
1,496 Questions