Questions & Answers for: thumb lever Motorcycles

...thumb lever controls so that when you push on the ?left? lever, your scooter will move in the forward direction, and pushing on the ?right? lever will move your scooter in reverse. If you don't want ...

...thumb lever is one step and the other is lifting the handle bracket up. The handle is held in place by two metal pins (one on each side of the handle bracket). The pins slip down into a notch on the ...

...lever. Move your thumb slightly to let the fluid/air squirt out until only fluid comes out, no air. Reinstall keeping it full of fluid, try and let the fluid gravity feed down the line, watch the ...

...thumb-lever to full choke, and remove the air filter cover. Observe the flat brass spring behind that cover (on the left side of the unit). It should be ABOVE the shaft that rotates when the ...

...thumb lever. Where can I buy an additional thumb throttle thumb lever to add to my 2008 Polaris Sportsman 500 ATV?Still want the right one just wanna see if I can add a left also? ...

...response. We take the time to answer your question. take the time to rate us.Thanks and good luck 4 Thumbs - Very Helpful 3 Thumbs - Helpful 2 Thumbs - Somewhat ...

...throttles or one. It should have a trigger and a thumb lever. Be sure the thumb lever is closed. if that is not the problem your mixer might be to rich. it says 50:1, but use 40:1 and see if that ...

...lever, the lever won't go through the holeand the popup won't pop up. Pull the lever back out, rotate the plug 90 degrees with your fingertips or thumb, and put it back in. It may take several

...thumb-turn lever. I have used several items to push in the pin-hole, including a 1/16 allen wrench, but it's not releasing the thumb-turn knob. Please help!! This information sounds more like it ...

...thumb and forefinger. Generally the larger of the two levers is to move the chain onto a larger size gear cog, one click of the lever equals one gear. Use the smaller of the two levers to return the ...