Questions & Answers for: Mitsubishi throwing belt

when starting belts kick off first of all make sure the all the pulley turn if one is locked it will burn the belt or throw it off. check the alignment of the pulleys that will always throw it off

...The vibration could be cause by a loose belt that drives the A/C Compressor. If not, the compressor, itself, could be coming apart internally throwing off its balance as the internal parts

I check the timing belt on my 2.4 sohc Galant. It seems intake. could the balaence belt cause the engine to make nosies and suddenly stop and not start. No, the balancer belt just spins to cancel ...

trying to pull off a crank pully on a 96 3000gt you have to buy or rent a gear puller. Autozone rents pullers Just becareful, because if you can throw off the timing by turning the crank without the ...

i have a 09 lancer rallyart and the serpentine belt keeps wanting to slip off any ideas and all the teath lined up right This is usually caused by a bad idler or tensioner pulley. If the bearing for ...

...this...the bearings in the compressor or water pump can come and go at first...throwing the belt is usually the first symptom...your adjustment may have fixed a stretched belt.  Hope this

...throwing a code saying timing skipped a tooth double check all the belt timing marks and if it really has skipped a tooth you will have to release the belt tensioner, reposition the belt and ...

...Also check the crank pulley for walking outward and throwing the belt alignment off. If the crank shaft pulley appears to have moved out you will need to replace the crankshaft harmonic ...

...has no enuff power to crank. timing belt probably slip or broken throwing off valve timing.if you getting fuel and spark more likely timing belt.timing belt need replacing every 60000 miles

engine will turn over but wont start i have a 1992 chrysler lebaron 3.0 (mitsubishi engine) I just did the water pump, timing belt, cam and crank seals (it was leaking oil profusely). Now the car turn