Questions & Answers for: hull transducer mounting

...transducer - a smooth hull will always keep your depth working until a higher boat speed. if the transducer is growing stuff itself then gently scrape it off - be really careful not to scratch the ...

under the transducer. If you have a transom-mount transducer, make sure the bottom surface is level or angled slightly down. If you have a thru-hull, make sure your bottom is fairly clean in that area

...hull transducer kit. Apelco were taken out by Raymarine who advised me to contact Airmar who made the transducers. So far no answer but their website said to allow a few days. The part number is ...

...whats the problem? Turbulence on the transducer is almost certain. If transom mounted, **** it slightly deeper aft and ensure that the leading edge is not exposed. If through hull, call me ...

...transducer inside the hull you may use the XP 9 20 T with temperature and you can use epoxy to mount the transducer) If you want to keep in the compartment you have created you may want to just put ...

...hull transducer or a transom mount transducer are your options here. Just in case you require it, your Owners Manual can be viewed/downloaded at: http://ca.binnacle.com/pdf/Uniden-QT206-manual.pdf ...

...transducer installation is more important than anything.. next to correct wiring! You must make sure the mounting is good,,, if its outside the hull, make sure its sitting 1/16th below the hull with ...

...easy if your transducer is mounted inside the hull and reads through the hull. Not so easy if it is a through-hull mount. Be sure it is mounted correctly to the hull if it is mounted inside the

hull transducer , sonar works sometimes then will not work rest of day , Depth usually inop although occasionally works even at higher speeds ? Check the mounting location, check the cord connections,

...transducer (depending on which one you have) should be mounted to the hull of the boat. If a transom mount, at the back of the boat of course and if a through-hull or in-hull ducer in an area that ...