Questions & Answers for: Dodge Dakota throttle plate

2004 dodge dakota sport won't idle. starts with your foot on the gas then dies when you let off. Have you tried cleaning your throttle plates and iac motor

...throttle plate for excessive build up. Remove the air cleaner assemble and use a flash light to look into the throttle body and manually open the throttle plate by moving the linkage. if you see a ...

...throttle plate and maintain idle speed. If the IAC is sticking it sometimes cannot compensate fast enough to avoid a stall. The problem is aggravated by the Air conditioner clutch cycling on while ...

just instaled a holly on a truck idles fine ok throttle responce on park but as soon as its in gear if i just touch the gas it cuts off With the engine off and the air cleaner removed, look into the ...

...throttle plate with spray carb cleaner. use a toothbrush and rags to get it clean. If problem persists then remove and clean the Idle air control valve and the mounting hole. replace PCV valve. I ...

...throttle bore and plate with spray carb cleaner. use a toothbrush and rags to clean it out well. Then clean the IAC valve and its bore. lastly replace the PCV valve. use the rest of the carb cleaner ...

...throttle plate that opens when you step on the gas. remove the air cleaner use carb cleaner and a rag,spray into the throttle body and wipe out all the gunk build up.hold the throttle open and get in ...

when i start my 01 dakota the rpm goes up to a normal level then drops down and shuts off need to clean or replace the idle control valve and clean the throttle plate.

...throttle plate is closed, and there are no vac leaks, the only thing left is the idle air control valve on the side of the throttle body. It may be stuck open. The computer controls idle speed by how ...

is ok When was it last tuned? Are plughs/ leads (wires.) / distributor cap etc all working fine? Does it only do this at low revs? Check the Idle Air Control and clean the throttle body bore and plate