Questions & Answers for: throttle lever

Throttle lever kit part #530071726 and choke lever kit part #530071725. If you have: ZAMA model C1Q-W11 carb, the choke AND throttle levers are BOTH a part of the carb itself. (Would need a whole carb

...throttle lever has moved round slightly, Look under the throttle lever where it connects to a stem, this stem should have a cross slot on it , you need to undo the throttle lever, two allen bolts ...

...throttle lever to where it would be at full throttle. Then you can put the cable back in the catch for the cable that is on the throttle lever and let go of the throttle lever. The throttle cable ...

throttle lever to its full throttle position to automatically adjust cable.Release throttle lever and check cable for sticking or binding. The cable may appear to function properly with engine stopped

...throttle pot. Move the speed pot while pushing the lever forward. If it works could be the speed pot has a dead spot on it. Also check wires loose and a mechanical issue with the throttle pot and the ...

lever on MPI throttle body moves off idle position. Lower vehicle. 1991/1992 Rear Wheel Drive Truck There is also an adjustment procedure for front and rear band adjustments at engine if you need them

...throttle lever that one end of the spring goes into. The other end is attached to a stationary post directly in line with the throttle lever. Hook the spring in the throttle lever first and look for ...

...throttle lever and the governor lever moves forward , the governor will be ok the problem will be a missing spring/rod for the governor lever and throttle lever If that doesn't work then you have no ...

...control lever won't Stay put When you push the throttle control lever forward to go faster, it jumps back to the idle position and stay's there tighten up the screw that is the throttle lever ...

...throttle lever and the throttle butterfly, assuming it is a petrol engine. Unless it is fitted with a governed carburettor, which would have a direct connection, the throttle lever is usually ...