Questions & Answers for: GMC Canyon throttle control

2008 Colorado cruise control quit working? What can I check? Check for fuse and relay.. Also check all vacuum lines related to throttle body and/or intake.. Rate well ;o)

...throttle body Internal engine problem Failed PCM (powertrain control module) I say back to the shop if its a real problem, if at all to just clear the code to see if it comes back. That code is just ...

Fix code 506 po 506 computer detects idle is to low.may have bad idle air control valve or needs cleaning,also make sure throttle body is clean.

throttle control. That is, they don't have a regular throttle cable from the accelerator pedal to the engine. They rely on sensors and electronics to control the throttle. In this case, the P0506 DTC

idle keeps dropping below 500 in 2004 gmc canyon what might cause this either have the throttle body serviced or replace the IAC Motor. Idle Air Control Motor.

...the purge throttle valve located? theirs a part the purge throttle valve wich affects idle, sirging in engine with hesitation when accelerating and also check idle air control valve check air ...

...control panel says reduced power. Code 300 is for a random miss, code 17 is for a problem with the timing between the cam and crank sensors, and code 68 is a problem between where the throttle ...

throttle control, however the vehicle acceleration is limited. • Limited Throttle Mode--The control module will continue to use the accelerator pedal for throttle control, however the maximum throttle

...control valve and throttle valve. Buy a can of throttle valve cleaner (do not use carburetor spray cleaner!) from NAPA or Carquest (made by CRC chemicals) and spray it into the air intake while the ...