Questions & Answers for: Ford Explorer throttle control

Question about 2004 Explorer

5 Answers

Throttle Actuator Control System - Forced Idle P2106 Throttle Actuator Control System - Forced Limited Power P2111 Throttle Actuator Control System - Stuck Open P2112 Throttle Actuator Control System

Ad

Control (IAC) valve which is mounted to the throttle body - cutaway view shows air bypass direction --- REMOVAL & INSTALLATION Disconnect the negative battery cable. To remove the IAC valve, first

Ad

Question about 2005 Explorer

1 Answer

Throttle Control) Various Codes for the Throttle Body will be present Before you replace the Throttle Body because of a failed TACM (Throttle Actuator Control Motor) Spray the throttle inlet and plate

Question about 2005 Explorer

1 Answer

...Throttle Actuator Control Motor (TACM) Those are the codes you got DO NOT replace the throttle body Spray the throttle plate with- CRC Throttle Body Cleaner You should also have COP Ignition Coil-- ...

Where exactly is the iac valve located on a 04 ford explorer? 2004 and newer Ford Explorer's use throttle by wire with electronic throttle control. They don't have idle air control (IAC) valves.

...throttle control and now I guess it is running in default "limp-home" operation?? Sounds serious. What does this mean since there is no other explanation in the manual. Hello and welcome to Just ...

...throttle control actuator consists of throttle control motor, throttle position sensor, etc. The throttle position sensor responds to the throttle valve movement. The throttle position sensor has the ...

Throttle Control (ETC) Overview The Generation II (Gen II) torque based electronic throttle control (ETC) is a hardware and software strategy that delivers an engine output torque (via throttle angle)

Question about 2005 Explorer

2 Answers

...control - Throttle actuator control motor harness is open or shorted - Throttle actuator control circuit poor electrical connection P0401 Ford - Exhaust Gas Recirculation Flow Insufficient Detected ...

...control module (TCM) detects a failure with the transmission, the TCM sends a message to the instrument cluster over the CAN to illuminate the wrench warning indicator. You need to take it to the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

1998 Ford Explorer
1998 Ford Explorer

2,998 Questions

1996 Ford Explorer
1996 Ford Explorer

2,307 Questions

1999 Ford Explorer
1999 Ford Explorer

2,248 Questions

2002 Ford Explorer
2002 Ford Explorer

2,302 Questions

2004 Ford Explorer
2004 Ford Explorer

1,513 Questions

Manuals & User Guides

Loading...