Questions & Answers for: throttle body carbon build

...throttle body, but regardless the cure is the same. Your going to need to clean the throttle body and the idle air control valve (IAC). With a can of throttle body cleaner, (follow instruction on the ...

...throttle body and cnt seem to figure out where its coming from i have cleaned the throttle body out several times and the build up always returns.. what should i look for i dont have a catylitic ...

...throttle body and pay attention to the Idle Air Control (IAC) valve. The IAC is located by the throttle body and cleaning all the carbon build up should address the stalling issue you have. it's ...

throttle body can get carbon build up, resulting in a low idle, or possible check engine light. The carbon build up can be cleaned. The most effective way, is to actually remove the throttle body, and

throttle body, remove the air tube going to the throttle body get some carburetor cleaner, sprat it on a clean rag, clean the carbon off the throttle plate (open it with you hand) clean carbon off the

...throttle body. If it idles to slow and/or stalls when coming to a stop the you have carbon build up. Get a can of carburetor cleaner, remove tube going to the throttle body, get a soft cotton rag, ...

...throttle body bore for carbon build up. pretty common to have the the throttle body build up carbon between the throttle bore and throttle plate causing some unstable idle problems. you can clean out ...

...throttle body on 96 paseo insuficent air flo remove air cleaner and remove throttle body unit becareful dont get carburetor or throttle body cleaner on any plastic or rubber parts or any ...

throttle body linkage and plate has carbon build up.throttle body need taken off remove all plastic parts and rubber parts remove all electrical parts like idle air control valve and remove tps sensor

...throttle body need to be cleaned. On my 2002 yukon. . When it starts sticking or when you or when you open the butterfly and see carbon and oil build up I clean mine every time I change plugs hope ...