Questions & Answers for: throttle adjusting

need to adjust throttle but there is not an adjustment on throttle body That is correct. throttle adjustments are controlled by the computer. Any other adjustments will need to be done with a graphing

Ad

I know its a stupid qeustion but where exactly on the motorcycle is the air screw and throttle screw. I have a 2007 Suzuki rm125. The air mixture needle valve is on the Carb. Throttle screw as you ...

Ad

Question about 2002 FLHR - FLHRCI Road king

1 Answer

...adjusting the throttle cable first and the by adjusting the idle cable. The throttle cable is the front most cable where it enters the throttle twist grip. Important, once you adjust the throttle ...

Question about 2002 FLHR - FLHRCI Road king

1 Answer

how do you adjust the throttle & idle cables on a 2009 sportser Each cable has an adjuster near the throttle grip. They may be covered by a rubber boot. Slide the boot up so you have access to the

Question about 2006 XL 1200 C Sportster Custom

1 Answer

i changed my grips and in doing so my throttle cables have moved. the idle is loose though the throttle is not bad. was wondering how to adjust cables. There should be an adjuster in each cable just ...

Question about 2006 XL 1200 C Sportster Custom

1 Answer

Replace throttle cable There are two cables leading to the throttle. Both have two pieces. Cable 1 goes from the throttle about 12" long and connects to an adjustment piece joining it to cable2 which ...

Question about Vespa Scooter

1 Answer

Throttle cable slack on piaggio et2 We're to find adjuster To adjust the throttle cable slack on a Piaggio ET2, you will need to locate the throttle cable adjuster. The adjuster is typically located ...

Question about 2006 FXDI Dyna Super Glide

1 Answer

...adjusting screw, spring and friction pad in the lower housing if they were removed, position the throttle grip on the handlebar, place the lower housing on/over the throttle grip, position the ...

Question about 2006 FXDI Dyna Super Glide

1 Answer

adjust idle Hi Rick: There is usually an Idle adjust or throttle stop adjust on the throttle linkage at the Carb. If fuel injection, check the throttle control linkage for an adjust screw.

Briggs and Stratton would backfire and surge from about 1/2 throttle to full throttle. I cleaned carb, adjusted valves and governor. Now it idles at a excessively high speed and wont throttle down. I ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...