Questions & Answers for: General Electric three way switches

three way switch how do i wire Read the directions on the box, or click this link: ...

...can turn anything on and off independent of the others AND save a substantial amount of wire opposed to series, wich would require your wiring to go to and from the switches three times (SIX

...thing - door locked and pump motor ran constantly no matter what. Unplug the unit first! Remove three steel screws on the very top of the machine that hold the plastic trim on the back of ...

three way switches in my hall way. They worked great for about 5 tries. After that one works great and the other only turns it of and wont turn it back on. Its an old house and has 3 wires 2 black and

...black wire, green wire, and a white wire. Thank you in advance. [email protected] You bought a three-way switch, but that's OK you can use it. Connect green to green (that's the ground). Connect ...

...from the same hole- 2 black and one red. Is the red wire the ground wire? No. It is most likely a three way dimmer, where the two black wires would run to the other three switch, and the red wire ...

...the hose may have came off either at the tub or pressure switch. to open the panel there are three screws on the top back of the control panel then the control flips forward. make sure the

...to-install-gas-water-heater.html#troubleshoot For power vent water heater with Honeywell gas valve: three flashes indicate pressure switch or blower temperature switch not working. Typical causes ...

three switches, so if you only want to switches you simply remove the center switch and draw those lines straight across. You will need to purchase two switches with three terminals on them. Therefore

...in and open and close lid 6 times. MAgically it started working again but it seems to only last three loads. does any one have any help they can give me so i can fix my washer perminatly. Thanks ...