Questions & Answers for: Ace Hardware three way switches

...is a metal ring up close to the bottom of the sink. stick a phillips screwdriver in any of the three round holes and unscrew it a half turn and it will fall off. Please rate if this

...on how it comes apart There is a problem with the motor starter. Electric motors that large have three sets of coils: the stator, rotor, and starter coil. The stator coil doesn't move but it ...

...it to get it off/out of the sink. If your unit has the ISE type mount as shown in the image (three screws), you should be able to back those three screws out, push up on the flange that the ...

...the hardware from the sink. We have looked at the instructions, but our unit does not have the three screw mount. thank you for your help Is your mount the plastic ring kind? These are found on ...

...insinkerator or one made by insinkerator (whirlpool, kenmore, etc) you can hook up the new one in three easy

...hook the disposer from the drain by turning the ring that connects it to the drain. Tehn loosen the three screws that hold the drain onto the sink bottom and take off the snap ring and the drain will ...

...gasket from hardware store. If it's leaking around mounting flange you can try tightening three slot headed bolts and see if that helps. There is also a gasket that fits between tiangular ...

the badger 5 has just stoped working There are three possible things. 1) Circuit breaker tripped 2) Wall switch gone bad 3) Reset button tripped on disposal Reset is located near where wire connects ...

...up into place, and attach to old sink basket. Use new connector washer. Attachment ring catches at three points, all three have to connect. You can use bottle jack to lift disposal if you have ...

three boxes the main power supply goes to first. 99% of the time if you connect the light to the common on one switch and the power to the common on the other switch, the red runner only between the 2