...threading problems. 1. Put thread spool on the spool pin and put spool guard over spool pin to hold spool onto pin. 2. Take thread and put it under the bent tab by the circle tensioner. bring the ...
Needle Thread and Bobbin Thread I was smoothly sewing until the bobbin thread was tangled. I pulled out the bobbin case and removed the tangled thread from within. When I am trying to start sewing ...
...bobbin winding. There should be a screw looking thing that holds the thread taut while threading logo52's answer was perfect. If you have not passed your thread from your full spool and thru that ...
My needle does not pick up the bobbin thread. I double checked that I threaded the needle correctly and the bobbin seems to be in the right position. The needle doesn't look like it's making contact ...
How do you load the bobbin properly? Hi there, Well you may please follow the steps below - 1. Remove the bobbin from the sewing machine. Note: whether you have a drop-in, front or side-loading bobbin
...threading Check that the thread is tight around the bobbin. Make sure that the bobbin is in the right way around - the bobbin thread should double back on itself coming out of the bobbin holder. The ...
threading 3.Bobbin wound to tight or uneven=====try new bobbin 4.lint or thread on bobbin case=======clean inside case 5.Lint or thread inside hook==========clean inside hook 6.Bobbin case nicked bent
Question about Shark 9110 Sewing Machine
...material can cause the bobbin to jump. Make siure that the needle thread stays where it should, if one of the threading sites come undone this can cause bobbin jump too.Hope something here
Question about Dressmaker 998B
For the dressmaker II, the first bobbin, I got through step 1-5 but where the does step 6 go BECUZ that's really trippin me, PLS tell me. And the instruction is not clear at all, I don't understand it
Question about Dressmaker 998B
I have a euro pro shark sewing machine. I just changed the thread for another project and cannot get the needle to pick up the bobbin thread. Any ideas? Try installing a brand new needle. Bent/damaged
Usually answered in minutes!
132 Questions
105 Questions
58 Questions
66 Questions
64 Questions