...stuck. The thread just doesn't slide through easily. Can anyone help? Thanks!! sometimes the thread on mine will get twisted and creates too high a tension. try re-threading . Mine did this , I have ...
...stuck with thread a pfaff 1222. The bobbin holder has thread stuck in it and we cannot get it out. How do we take apart the pieces of the holder to get the thread out. With power off, take the needle ...
passed through the tension discs correctly. Try re-threading and remember to raise the pressure foot when you thread. Or try cleaning the tension discs as there may be stray bits of thread stuck there
Question about DDL-8300
...no thread, The needle is hitting something. Could be needle not up all the way or something needs adjusting. If it gets stuck with thread. It is probably an upper thread tension or threading
Question about CS-6000i Electric Sewing Machine BRHCS6000I CS-6000i Electric Sewing Machine
...is thread stuck in the upper threading compartment. The thread is sticking out and when I pull on it is does nothing. It's stuck in there. try using a pair of tweezers or wire pliers to get the ...
Question about CS-6000i Electric Sewing Machine BRHCS6000I CS-6000i Electric Sewing Machine
...thread can move or does it get stuck? If it gets stuck the tension control may need adjusted or cleaned. 5. Pull the bobbin thread above the throat plate and pull on the thread. It must have some ...
Question about CS-6000i Electric Sewing Machine BRHCS6000I CS-6000i Electric Sewing Machine
thread is stuck inside my innovis-v7. can you tell me how to get it out please Where is the thread stuck??? If in the bobbin area, cut the top thread, then try to remove the bobbin case. If unable to,
Question about CS-6000i Electric Sewing Machine BRHCS6000I CS-6000i Electric Sewing Machine
...toothpick to gently (gently) remove dust balls, thread, etc from the machine. My thread was breaking and I found a little thread stuck inside. Once I removed the thread, the machine worked fine
Question about CS-6000i Electric Sewing Machine BRHCS6000I CS-6000i Electric Sewing Machine
...stuck on thread jam screen? It kept eating the fabric and thread jamming. I have cleaned it, changed needle and re-threaded. This made no difference. Sound like a tension problem..or thread stuck ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions