...getting stuck. The thread just doesn't slide through easily. Can anyone help? Thanks!! sometimes the thread on mine will get twisted and creates too high a tension. try re-threading . Mine did this , ...
...stuck with thread a pfaff 1222. The bobbin holder has thread stuck in it and we cannot get it out. How do we take apart the pieces of the holder to get the thread out. With power off, take the needle ...
Question about Drop-In Bobbin 16231 Mechanical Sewing Machine
...thread is getting stuck down in the bobbin area. Then my material gets stuck pulls towards the teeth. Ensure that you are threaded correctly, set your tension for roughly 4.5 and "floss" your machine ...
Question about Drop-In Bobbin 16231 Mechanical Sewing Machine
Thread gets stuck around a knob on Necchi 536 FB sewing machine I have a Necchi 536 FB, probably 15 years old. Works well, except that thread gets really taught in the machine. It gets REALLY stuck ...
thread gets stuck around bobbin case I am attempting to thread my machine but whenever I try to drawup the bobbin thread, the needle thread gets stuck around the bobbin case and won't come back up. My
...getting skip stiches from the top and lot of thread is accumulating at the bottom, as a result it's getting stuck. Please advice. Thanks I suspect the thread has not passed through the tension discs ...
Question about DDL-8300
...no thread, The needle is hitting something. Could be needle not up all the way or something needs adjusting. If it gets stuck with thread. It is probably an upper thread tension or threading
Question about 2005 Mechanical Sewing Machine
...thread got stuck in bobbin case and it is jammed threads stuck in the bobbin case and it is stuck and does notturn around at all then you need to get the bobbin case out and clear all thread . if you ...
Question about 2005 Mechanical Sewing Machine
...thread can move or does it get stuck? If it gets stuck the tension control may need adjusted or cleaned. 5. Pull the bobbin thread above the throat plate and pull on the thread. It must have some ...
Question about 2005 Mechanical Sewing Machine
thread is stuck inside my innovis-v7. can you tell me how to get it out please Where is the thread stuck??? If in the bobbin area, cut the top thread, then try to remove the bobbin case. If unable to,
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions