Questions & Answers for: thread brother cs 8060 sewing

...brother sewing machine displays an E6 problem I read in the manual that the motor probably locked up because the thread is tangled. I would check the bobbin area and clean out. then shut the machine ...

machine jammed wheel will not turn needle will not move motor jammed wheel will not turn a loud noise whenever ewe try to start Thread is caught in the hook...Remove the upper thread and bobbin case, ...

...sewing machine jammed wheel will not turn Thread is caught in the hook...Remove the upper thread and bobbin case...turn the hand wheel backwards and forwards by hand and remove the thread remands. ...

brother CS 8060 bobbin wont wind...but motor runs im a new sewer... have wound thread on my bobbin 2x... also the other day perfectly... went to do it again today....motor runs....but wont wind or ...

...thread needle. not having other problems. and this is new problem. have used this machine for several years with no issues. Be sure that your needle is one that matches your machine, most are ...

...thread in the bobbin compartment We are having the same trouble with a Brother cs-8060, bought a new bobbin shuttle but still have the problem of a mass bunching of thread in the bobbin compartment ...

...the thread is tangled. I suggest you completely unthread the machine, including the bobbin. clean out any lint or bits of thread in the bobbin area, and carefully rethread. Hope this helps! ...

...brother cs 8060 - as i pushed the thread compartment into the machine a silver metal forked thing flew off the machne hitting me in the neck. it has two pins one on each side and is actioned by a ...

brother cs-8060 wheel knocks I just turned on my machine and when I press on the pedal, there is a loud knocking sound as the manual wheel turns. If I turn it by hand it still knocks/clicks and ...

...brother cs-8060 sewing machine but I don't have the manual for it. When I start to sew the machine makes a loud sound the and woont sew normally and then I get an E6 flashing on the machine. My ...