Questions & Answers for: theft deterrent flashing light

theft deterrent system. Your body control module doesnt understand your key, therefore tells your pcm to discountinue fuel supply. To reprogram the system, start the engine and let it stall. Leave the

...Theft Deterrent System (Alarm) The Theft Deterrent System starts up with the horn and flashing lights when I put the key into the lock. The owner;s manual states that opening the door with the key ...

Theft-deterrent system problem Car won't start. Theft light flashing every 2 seconds. Key in the ignition wont disengage the theft-deterrent system. let it sit for about an hour, untouched to let it ...

theft deterrent light is on and my car wont start or let me get my key out of the ignition what can i do? turn the key to the "acc" position. you will notice the theft light flashing. leave the key in

...theft deterrent feature is activated..take a look at the security light when this happens..is it flashing?? if so try a different key or you may have to replace the Ignition cylender and relearn the ...

...theft deterrent system is shutting down. Is your vehicle equipped with a theft deterrent system ? If so there's several things that could be wrong or it could be as simple as doing what's called a ...

...right off after I start it. I'm getting a clicking sound coming from the fuse box behind the seat. What could be the problem? Is the theft light on or flashing? Theft deterrent system may be ...

...theft deterrent module must be cleared for a relearn. PASSLOCK Changing - Components Description Important: Due to component variability, the vehicle theft deterrent (VTD) system must have the learn ...

...Theft Deterrent Fuel Enable Signal Lost DTC P1630 Theft Deterrent Learn Mode Active DTC P1631 Theft Deterrent Start Enable Signal Not Correct DTC P1632 Theft Deterrent Fuel Disable Signal Received ...

...theft deterrent issues In most cases the theft deterrent system in your 2007 Chevrolet Impala will reset itself in 10 minutes. You can also remove the fuse for 10 seconds and replace it to reset the ...