Questions & Answers for: test light on

...test with the light on? it will not pass the test with the light on, and if u turn off the light they will know when they test it by testing/checking the system readiness function. Go to a Kragen or ...

...test light, you can remove the bulb you replaced, turn on the turn signal and park lights and see if the test light lights up. If the turn signal contact blinks the test light and the tail contact ...

...test light or probe. TROUBLESHOOTING (1) generally a horn just has two wires positive and negative. Test negative by connecting dc test light negative to the negative on the back of the horn. use ...

...test light. Disconnect the wire to fog light and put test light on it and see if it lights up. Also test the hot positive wire going to switch. If it doesn't lite here, then the fuse may be bad or ...

test light clamp to negitave battery cable and tuched prong of test light to negitave battery post. while ignition swich is off the test light is off, when egnition swith is on test light is on. while

...test light (computer safe led type) Get someone to put on brake and earth test light lead to bold on vehicle and hold test light probe in centre of bulb holder. It should light up. If not move earth ...

...test light hook up ground to negative side of battery,then touch probe on positive terminal to make sure test light is functional.next- turn lights on and then probe the plug at each terminal- there ...

test light. The light can be bought at any auto parts store under $20.00. Hook one end of light to ground (metal unpainted on truck) touch the other end on fuse touch metal connection on both sides of

...test light to the cable and battery post and & checked all fuses but the test light never went out. Now what? That's the wrong way to check fuses with a test light! What you SHOULD do is, have both ...

test light from the battery, to the light fixture. You can test the connections. Probe the bulb contacts first. Clamp the test light to ground to test for power then clamp to power to test for ground.