Questions & Answers for: test inertial unbalance switch maytag

Question about Neptune MAH5500B Front Load Washer

2 Answers

...test this before putting things back together (probably a good idea) by temporarily putting the door on properly and trying a "spin" cycle.Another thing to note, you could actually check the ...

Ad

Question about MAH6500 Neptune Front Loading Washer w/Built in Water Heater

1 Answer

...unbalance switches on mah3000aww My washer went out of balance and now won't reach high spin speed on spin cycle, it will spins slow. There appear to be three balance related buttons, a strut, a tub ...

Ad

Question about Neptune MAH5500B Front Load Washer

1 Answer

...inertial unbalance switch. Or check the door latch assembly, it's possible for the door to lock enough to turn the 'door lock' light on, but not move far enough to actuate the 'spin enable' switch. ...

Question about Neptune MAH6500A Front Load Washer

2 Answers

...test this before putting things back together (probably a good idea) by temporarily putting the door on properly and trying a "spin" cycle.Another thing to note, you could actually check the ...

Question about Neptune MAH5500B Front Load Washer

1 Answer

...test this before putting things back together (probably a good idea) by temporarily putting the door on properly and trying a "spin" cycle. Another thing to note, you could actually check the ...

Question about MAV6300 Top Load Washer

2 Answers

...test this before putting things back together (probably a good idea) by temporarily putting the door on properly and trying a "spin" cycle.Another thing to note, you could actually check the ...

Question about Neptune MAH5500B Front Load Washer

1 Answer

...test this before putting things back together (probably a good idea) by temporarily putting the door on properly and trying a "spin" cycle. Another thing to note, you could actually check the ...

Question about Neptune MAH7500WH Front Load Washer

1 Answer

...unbalance sensor, or inertial switch, it should be N.C., or normally closed, giving a "balanced" signal back to the control board. My unit had no continuity even when there was no out of balance, or ...

...Maytag mav6200 with a problematic unbalance situation , the washer work great. for years the unbalance problem has progressive got worse overtime . Over time the unbalance has gotten worse most loads ...

Question about Atlantis MAV6260AWW Top Load Washer

1 Answer

...unbalance switch. I've checked that and it looked jammed in, I put my hand under and released it and it now goes in and out by itself but it's still showing unbalance. Is there anything else I could ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...