Questions & Answers for: Honda Civic tensioner

...with whiteout on the cam gear and timing belt so when you put it back you are not off. Loosen the tensioner with a 14mm and remove the timing blet. Use a 10mm socket t oremove the WP bolts. The ...

how do i loosen the auto tensioner on my 02 civic si 2002 Honda Civic SI 2.0L MFI VTEC DOHC 4cyl Place a long-handled, boxed-end wrench or a belt tension release tool (A) on the drive belt ...

...on cogs? fit c/belt anticlockwise from crank pully cog then making sure that belt ist taut on none tensioner side ? slacken and re tighten tensioner bolt then turn crankshaft anti clockwise sixturns ...

do i need a belt tensioner for the serpantine belt? I am replacing the alternator. If the tensioner is still working fine, don't worry about it. These rarely give problems, and are easy to replace, so

...tension of your belts. You might have grease on it tranny fluid,antifreese, or you don't have the tensioner tight enough or need new tensioner. Good luck (remember rated

...INSTALLATION of timing belt:Fig. 1: View of the timing belt cover Fig. 2: Loosen then timing belt tensioner using a ratchet and short socket Fig. 3: Matchmark the direction of rotation of the

Need to replace A/C tensioner pulley becauase the bearing is bad...how do I do this? u should just replace the whole ac compressor dont waste ur time its cheap at a junk yard 50-75 dollars Do not ...

...belt on a 2006 honda civic Hello georgej562, You will need a long handled box wrench on the belt tensioner from above the engine. Turn the wrench slowly in the direction shown in the pictures

...marks align as noted. Remove the lower crankshaft bolt and pulley, and lower belt cover. Loosen tensioner bolt and push it out of your way and remove the belt. Put on the new timing belt in this ...

...if your engine is working ok,then use the marks by using some reflecting paint . Loose the timing tensioner and remove the belt. fitting the new belt and tensioner be careful on the installation