Questions & Answers for: Hyundai tensioner

...3.Run the timing belt onto the water pump pulley, the front camshaft sprocket and the timing belt tensioner. 4.Apply force counterclockwise to the rear camshaft sprocket with tension on the tight ...

Ad

Question about 1998 Tiburon

1 Answer

Timing a 2.0L hyundai RETAIN PUSHROD WITH SUITABLE PIN THROUGH HOLE IN TENSIONER BODY. INSTALL AUTOMATIC TENSIONER UNIT TO TENSIONER BLOCK. TIGHTEN BOLTS TO 22-27. FIT TIMING BELT IN ANTI-CLOCKWISE ...

Ad

...InstallationRaise and support the vehicle. Remove the engine splash shield. Rotate the drive belt tensioner clockwise to release the drive belt tension. Remove the drive belt from the alternator. ...

...align with cylinder head upper face. Dowel pins on camshaft sprockets should face upwards. Slacken tensioner bolt. Move tensioner away from belt and lightly tighten bolt. Remove, automatic tensioner ...

Question about 1995 Elantra

1 Answer

...upper cover, timing belt lower cover. Turn crankshaft clockwise to TDC on No. 1 cylinder, slacken tensioner bolts 5 & 6. Move tensioner away from belt and lightly tighten bolts. Remove timing ...

Question about Motor 2004 Sonata

1 Answer

changing the timing belt on a Hundai what steps are involved in changing the timing belt, tensioner and rollers on a 2004 Hundai with a 2.7 V6 motor Remove all necessary components for access to the ...

...the timing marks on the camshaft sprocket and cylinder head are aligned. Loosen the timing belt tensioner bolt and turn the tensioner counterclockwise as far as it will go. Tighten the adjusting ...

...REPAIR MANUAL IS A MECHANIC ROAD MAP LOST WITH OUT IT.SOUND LIKE YOU HAVE PROBLEMS WITH TIMING BELT TENSIONER LOOSEN THE TIMING BELT TENSIONER BOLT.INSTALL TIMING BELT ON THE CRANKSHAFT SPROCKET AND ...

how can i fit engine belt of hyundai azera 2009 Find the tensioner. The serpentine belt tensioner is what holds the belt in place with the correct tension: it is held to the engine by two bolts. Some ...

Question about 2006 Sonata

2 Answers

where is the tensioner on 2006 sonata with v6 engine TENSIONER PULLEY IS SMALL PULLEY NEXT TO CRANKSHAFT.YOU NEED A WRENCH TO ROTATE TENSIONER PULLEY CENTER BOLT TO REMOVE BELT TENSION. follow your ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2004 Hyundai Santa Fe
2004 Hyundai Santa Fe

1,503 Questions

2001 Hyundai Elantra
2001 Hyundai Elantra

1,180 Questions

2000 Hyundai Accent
2000 Hyundai Accent

1,131 Questions

2006 Hyundai Sonata
2006 Hyundai Sonata

1,254 Questions

2001 Hyundai Accent
2001 Hyundai Accent

1,082 Questions

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...