...technics turntables. It is a SL1210mk2. I have tried changing the fuse in the plug but still nothing happens when I turn it on. Is there a simple solution? Why not try replacing the whole power chord ...
Power failure Plug fuse is okay but no life whatsoever. Switch seems okay, so wonder why it cut out. Any ideas? Usually just random failure of the 250mA fuse (F1) which is on the power input circuit ...
no power on 1 deck, switched from 240volts to 110volts whilst it were switched on. any advice or no off any places in leeds bradford that repair? May have just blown a fuse (F1 / 250mA). We service / ...
1210 mk2 troubles I was spinning records the other day and with no warning my 1210mk2 just turned off and would not come back on. any ideas on what caused this and what steps to fix it I might try? ...
power switch not lighting and turntable wont work Most likley the 250mA fuse (F1) on the power input circuit board under the platter
what fuses go in my decks F1 is a 250mA and F2 is a 1A. Plug fuse should be 3A
technics SL 1200MK2. I just moved to Europe where the electrical current is 240 as opposed to the US current of 110. Inadventanly, I plug in without switching to 240 and fried the electrical supply in
...turntable and see what you can find. Fuse F1 / 250mA fails for no apparent reason. It is on the AC power input circuit board which is under the platter and black plastic cover ...
...Technics 1210 Keeps Blowing. Hi there, I have been asked by a friend to repair his decks, I have little electronic knowledge but am having a crack at it any way :) Problem is the Fuse F1 250mA keeps ...
Question about Technics Sl-1210 Mk2 Turntable black Sl1200 Proaudiostar
F1 Blowing after replacing RCA cable Technics Tried replacing the RCA cable inside the turntable but when trying to play a vinyl the power cuts out, resulting in having to replace the F1 (250mA) fuse.
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions
